upload
The Petroleum Extension Service
Industry: Education; Oil & gas
Number of terms: 4495
Number of blossaries: 0
Company Profile:
The Petroleum Extension Service (PETEX) is a unit of the Division of Continuing Education at The University of Texas at Austin and has been training companies and individuals since 1944.
to remove sand, scale, and other deposits from the producing section of the well to restore or increase production.
Industry:Oil & gas
a heavy and relatively short length of pipe that fits in the drill stem between the kelly and the drill pipe. The threads of the drill pipe mate with those of the sub, minimizing wear on the kelly.
Industry:Oil & gas
a device normally mounted near the monkey board to afford the derrickhand a means of quick exit to the surface in case of emergency. It is usually affixed to a wireline, one end of which is attached to the derrick or mast and the other end to the surface. To exit by the safety slide, the derrickhand grasps a handle on it and rides it down to the ground. Also called a Geronimo.
Industry:Oil & gas
the tools or instruments, such as bailers and swabs, used to clean out an oilwell.
Industry:Oil & gas
a pneumatically operated device mounted on top of the kelly that, when actuated, causes the kelly to turn or spin.
Industry:Oil & gas
a special nuclear well log that produces an estimate of the relative amounts of oil, gas, or salt water in a formation. This log is electronically adjusted to reflect gamma ray emissions resulting from the collision of neutrons with chlorine atoms in the formations.
Industry:Oil & gas
a coupling used to connect and disconnect a driving and a driven part of a mechanism, especially a coupling that permits the former part to engage the latter gradually and without shock. In the oil field, a clutch permits gradual engaging and disengaging of the equipment driven by a prime mover. to engage or disengage a clutch.
Industry:Oil & gas
1. an undergauge channel or groove cut in the side of the borehole and parallel to the axis of the hole. A keyseat results from the rotation of pipe on a sharp bend in the hole. 2. a groove cut parallel to the axis in a shaft or a pulley bore.
Industry:Oil & gas
1. the well cuttings obtained at designated footage intervals during drilling. From an examination of these cuttings, the geologist determines the type of rock and formations being drilled and estimates oil and gas content. 2. small quantities of well fluids obtained for analysis.
Industry:Oil & gas
a continuous string of flexible steel tubing, often hundreds or thousands of feet long, that is wound onto a reel, often dozens of feet in diameter. The reel is an integral part of the coiled tubing unit, which consists of several devices that ensure the tubing can be safely and efficiently inserted into the well from the surface. Also called reeled tubing.
Industry:Oil & gas
© 2024 CSOFT International, Ltd.