- Industry: Energy
- Number of terms: 8202
- Number of blossaries: 3
- Company Profile:
American conglomerate currently ranked by Forbes as the world's largest company. GE has multifarious business interests including power generation and financial services.
A light source that generates light utilizing a thin filament wire (usually of tungsten) heated to white heat by an electric current passing through it.
Industry:Lights & lighting
The method of lighting a space by directing the light from luminaires upwards towards the ceiling. The light scattered off the ceiling produces a soft, diffuse illumination for the entire area.
Industry:Lights & lighting
Electromagnetic energy radiated in the wavelength range of about 770 to 1,000,000 nanometers. Energy in this range cannot be seen by the human eye, but can be sensed as heat by the skin.
Industry:Lights & lighting
A unit of temperature starting from absolute zero, parallel to the Celsius (or Centigrade) scale. 0C is 273K.
Industry:Lights & lighting
The standard measure of electrical energy and the typical billing unit used by electrical utilities for electricity use. A 100-watt lamp operated for 10 hours consumes 1000 watt-hours (100 x 10) or one kilowatt-hour. If the utility charges $.10/kWh, then the electricity cost for the 10 hours of operation would be 10 cents (1 x $.10)
Industry:Lights & lighting
The term used to refer to the complete light source package, including the inner parts as well a the outer bulb or tube. "Lamp", of course, is also commonly used to refer to a type of small light fixture such as a table lamp.
Industry:Lights & lighting
The lamp's identification code. For Projection lamps, this is a 3-letter-number code uniquely identifying the lamp for ordering purposes. In some instances, lamps with 3-letter (ANSI) codes are offered in more than one design voltage, in which case the voltage required should also be specified when ordering. Some GE Projection Lamps have an ordering code comprising of two or more 3-letter ANSI codes - such as EM/EKS and DYS/DYV/BHC. The first code is the ANSI code, the secondary codes identify which lamp the multiple-coded lamp can directly replace. Only the first code appears on the lamp itself. Multiple-coded lamps are so-designated by General Electric for the convenience of the customer. In nearly all cases, Miniature and Sealed Beam lamps are marked with a General Electric Trade number recorded with ANSI.
Industry:Lights & lighting
Referenced by IEC as Dimension C. Also referred to as "Base Face to Top of Lamp".
Industry:Lights & lighting
Filament lamps: Incandescent, Halogen, Halogen-IR. Discharge Lamps: Fluorescent, HID (High Intensity Discharge). HID Lamps: Mercury, HPS (High Pressure Sodium), MH (Metal Halide) and CMH (Ceramic Metal Halide)
Industry:Lights & lighting
